Pokefi Update Instruction ver220819

1. Preparation

a. Ensure the Pokefi is at least 30% charged or connect the Pokefi to the power supply

b. A computer with WiFi and Internet connection

c. Download the Update module from here or copy and paste the follow website address to the browser http://fota.mypokefi.com/release/full_rom/Pokefi-1.0.7_wipe_data.zip

d. Specify the path to store the update module and record the path details if you are promoted

 2. Connect to the Pokefi

a. Switch on the Pokefi

b. Connect the computer to the Pokefi

i. Find the WiFi name you specified before.  Or use the default SSID from the Pokefi package box or the label inside the battery compartment

ii.Connect the computer to the Pokefi WiFi

P1.jpg

 iii. Input the password you specified before or the default PWD printed on the Pokefi box or the label inside the battery compartment

P2.jpg

3. Access the Pokefi update page

a. Open a web browser (Google Chrome is recommended)

b. Input and go to the following website address http://192.168.43.1/#!/menu/sysupgrade

P3.jpg

4. Update the Pokefi Seed Module

a. Make sure you have read the instruction manual before proceeding

b. Click “Update by Upload”

P4.jpg

c. Click the “Browse” button

P5.jpg

d. Go to the path with the downloaded update module

e. Select the file “Pokefi-1.0.6_new_wipe_data.zip” and click the “Upload” button

P6.jpg

f. Wait for the upload finished

P7.jpg

g. Click “Please select update module”, select “Update seed module”

P8.png

h. Wait for the update finished.  (The update takes approximately 10 minutes to finish, STAY ON the update page and DO NOT press any button on the page until the update finishes

P9.png

5. Update the Pokefi Data Module

a. Click the “Refresh” button of the browser

P10.png

b. Click “Update by Upload”

P11.png

c. Click the “Browse” button

P12.jpg

d. Go to the path with the downloaded update module

e. Select the file “Pokefi-1.0.6_new_wipe_data.zip” and click the “Upload” button

P13.png

f. Wait for the upload finished

P14.png

g. Click “Please select update module”, select “Update data module”

P15.png

h. WAIT FOR  2 minutes, the following message appears “The device is being updated, please connect to WLAN later”

P16.jpg

i. After the update message appears, DO NOT press the Pokefi on/off button and keep the battery installed.  Observe the Pokefi signal indicator, the indicator will go off for 2-3 minutes, then go back on with the WiFi signal flashing in Red. 

(If the Pokefi signal indicator does not go back on after 5 minutes, restart the Pokefi and repeat steps 2, 3 and 5)

6. Verify the updated version

a.Connect the computer to the Pokefi WiFi

b. Input and go to the following website address http://192.168.43.1/#!/menu/sysupgrade through a browser

c. Verify  if the version is 1.06 or above

P17.png

d. The update is successful