On-Screen Instructions
Manual Upgrade Instructions for Pokefi Device
C
heck and make sure you are still on Pokefi WiFi (S1), then choose "Offline Upgrade", click "Switch Network" (S2). At this point, you will need to change to other available WiFi (S3). If new version found, click "Next" (S4) to proceed with the download.
.jpg)
C
lick "Start Download" (S5), wait until the download completed, then click "Next" (S6). At this point, you need to change the WiFi back to Pokefi before installing the downloaded package. Click "Switch Network" (S7), then change to Pokefi WiFi (S8).
.jpg)
C
lick "Load Package" (S9), wait until the progress bar shows 100%, then click "Upgrade" (S10). The progress bar (S11) will show the installation in progress (it might take ~10-30 minutes depending on firmware file size). Stay on this page and wait until the upgrade completes!
1) DO NOT refresh this page
2) DO NOT turn off the Pokefi
3) DO NOT change to other WiFi
​
Once upgrade completed, you will see "Reboot Pending" is on (S12). The Pokefi WiFi will show Red WiFi light and restart automatically in a while (DO NOT POWER OFF during the restart). Wait (and be patient!) until the Pokefi's WiFi light turns to Green flashing!
You can check the version from the home screen in the Pokefi App. If you try the upgrade again, for successful upgrade, it will show "Your Pokefi is up to date" (S13).
​
